Measurement Testing

Mjr · Site Admin Joined: 13 Jul 2005 Posts: 294

Here are two useful Spectrum Analyzer from Rohde & Schwarz and Agilent

Rohde & Schwarz FSUP26
20Hz-26.5GHz Signal Source Analyzer with integrated Spectrum Analyzer

Dynamic Range:
DANL: -138dBm
TOI: +12dBm
Resolution bandwidth: 1Hz to 50MHz
Frequency resolution: 0.01Hz
Test port connector: 3.5mm/N female
Phase Noise measurement:
Frequency range: 10MHz to 8GHz

Offset frequency range with internal reference and internal phase comparator:
1Hz to 30MHz (standard)
Sensitivity with internal reference oscillator and phase detector
At 10kHz offset, input frequency 1GHz, -128dBc

VCO parameter characterization
20Hz-8GHz Frequency Range
Power supplies:
2 Tuning ports: -10V to 28V, 20mA
2 DC ports: 0 to 12V, 500mA
1 Aux port: -10V to 0V, 500mA

Option K30 recommend option B25

For rack mount kit use part number RS-ZZA-411

Length/Width/ Height /Ship Wt
18 "/ 17 " /7.5 " / 50 lb

Agilent N8975A
10MHz-26.5GHz Noise Figure Analyzer

10MHz to 26.5GHz noise figure analyzer. Simultaneous noise figure and gain measurement. High resolution color display, GPIB, printer, serial interface, 3.5 in floppy disk. Single box to 26.5GHz. User selectable measurement bandwidths. Single and double sideband measurements. LO control over dedicated 2nd GPIB. May require noise source.