|
Measurement Testing
A Resource Dedicated to Environmental Testing, EMC Testing, Vibration Testing and related areas
|
|
|
| Author |
Message |
Mjr
Site Admin
Joined: 13 Jul 2005
Posts: 294
|
 Posted: Sat Jul 16, 2005 12:13 am Post subject: Product Spotlight: KeyTek EMCPro Plus EMC Test System |
 |
|
One of Thermo Electron Corporation's workhorse EMC test systems is KeyTek EMCPro Plus EMC Test System.
Here are some of its highlights:
| Quote: |
KeyTek EMCPro Plus EMC Test System
An efficient, easy-to-use EMC immunity test system, the KeyTek EMCPro Plus answers industry demand for a mid-range compliance-level system, and fully addresses new requirements for a 100khz burst rate per IEC 61000-4-4, Edition 2 (EFT) and 80% clip per
IEC 61000-4-11, Edition 2 (PQF).
• Test capabilities for EMC Directives PLUS: ANSI/IEEE, CCITT, ETSI, UL, & others
• Can be configured with up to seven test capabilities
• Combination & ring wave surge test to 6kV
• Many options: mains & I/O coupler/decouplers, magnetic field monitors, coils, etc. |
| Quote: |
Product Detail
KeyTek EMCPro PlusTM
An advanced, multi-capability, low-cost EMC immunity test system to address a broad range of testing capabilities including Bellcore, UL, IEC, ANSI/IEEE, CCITT and ETSI.
Designed to test well beyond the requirements of the CE Mark, users can configure the EMCPro Plus to meet specific test requirements using the full line of options and accessories including mains and I/O line coupler/decouplers, magnetic field monitors, coils and more.
Breaking the 4.4kV voltage barrier for combination wave, telecom and ring wave surge testing, the EMCPro Plus offers surge testing to 6kV. It is the only multi-capability tester on the market to offer the combination wave with one of the two additional built-in surge waveforms. The EMCPro Plus is also the only tester to monitor surge voltage and current at the output terminals. It monitors at the output of the coupling unit and will automatically switch connections according to the coupling mode instead of measuring at the generator, which can lead to large errors.
When test requirements change, or as standards continue to evolve, upgrading is simply a matter of adding appropriate options or accessories to your current EMCPro Plus.
The EMCPro Plus performs compliant-level testing in accordance national and international standards.
The EMCPro Plus can be configured with up to 7 test capabilities in a single unit.
The EMCPro Plus has a 5 year warranty program subject to the purchase of an annual calibration by Thermo Electron or an authorized Thermo Electron service center. Customers have the option of factory or on-site calibration programs from one of our many service and calibration offices located worldwide to accommodate their testing schedules and budgets. |
See the product at: http://www.thermo.com/com/cda/product/detail/1,1055,18269,00.html
|
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Powered by phpBB © 2001, 2005 phpBB Group
|
