|
Measurement Testing
A Resource Dedicated to Environmental Testing, EMC Testing, Vibration Testing and related areas
|
|
|
| Author |
Message |
Mjr
Site Admin
Joined: 13 Jul 2005
Posts: 294
|
 Posted: Sun Dec 25, 2005 6:04 am Post subject: TTi's Mechanical Design for Product Reliability course |
 |
|
TTi's Mechanical Design for Product Reliability course
| Quote: |
Applications Random vibration and shock are important in most engineering applications where the product is exposed to vibration and shock during transport and service. The need to understand the effects of vibration and shock on product reliability is paramount today where electronic/computer components are part of almost every product.
For Whom Intended Many engineers need specialized education to properly understand this generally unfamiliar environment and to reproduce it in environmental test laboratories. This course is for design engineers and project managers. It also helps quality and reliability specialists. It is designed to serve the needs of personnel in a wide range of industries where equipment problems may be encountered during the shipment and use of their product.
The instructor maintains good balance between theory and practical applications. Project personnel, structural and packaging engineers learn how to take the effects of vibration and shock into account in the design process.
Brief Course Description The course commences with an introduction to vibration and then covers basic dynamics theory including relationships between displacement, velocity and acceleration. Dunkerley's and Rayleigh's methods are introduced, with examples. Damping, transmissibility ratio and resonance stacking are addressed. The course then covers basic structural theory: tension, compression, stress, strain, torsion and moments of inertia. Examples show the torsional shape factors of different structures. The instructor then addresses frequency and stiffness of beams, plates and gussets, providing useful graphs, formulas and examples.
Modal analysis is then discussed, with mention of multi-degree-of-freedom systems, modes and complex systems. Measurement and fixturing for modal analysis and testing are covered before moving on to a brief discussion of random vibration, including power spectral density theory. The concept of RMS acceleration is discussed. Mechanical shock and its design implications are then discussed. Methods of isolating assemblies from shock and vibration are covered.
Fatigue is covered, including discussion of crackgrowth rates, fracture mechanics, the SN curve, and the use and abuse of accelerated testing, including Miner's hypothesis.
Material selection is then covered, with information on overall and designlimiting material properties. Tools are provided for comparing different materials. The course concludes with chassis analysis and general design suggestions, such as methods for increasing natural frequencies. |
Course Outline No. 310
- Introduction to Vibration
- Dynamic Force and Motion
- Laws of Motion
- Weight vs. Mass
- Gravity
- Density
- Force, Mass and Acceleration
- Degrees of Freedom
- Displacement
- Velocity
- Acceleration
- Natural Frequency
- Sinusoidal Waveform
- Modeling Complex (MDoF) Systems
- Dunkerley's and Rayleigh's Methods
- Transmissibility
- Isolation
- Damping
- Examples
- Review of Structural Design Fundamentals
- Material Properties
- Tension and Compression
- Stress and Strain
- Shear
- Torque
- Moments of inertia
- Torsional Stiffness
- Torsional Shape Factors
- Bending Stiffness
- Instability of beams and flanges
- Frequency and stiffness: Beams, Plates, Gussets
- Natural frequency and stiffness graphs for various structures
- Beam Formulas
- Plate frequency parameters, examples
- Column Resonance
- Axial Resonance
- Example: Stresses in a Loaded Beam
- Bolted Connections
- Preload
- Data on Bolts
- Design of Bolted Joints
- Stiffness Data
- Required flange material area
- Material thickness, stiffness
- Modal Analysis and Modal Testing
- Applications
- Modes, Natural Frequencies
- Fixturing for Impedance and Modal Testing
- Finite Element Analysis (FEA)
- Example
- Random Vibration
- Demonstrations-Sinusoidal Vibration, Complex Waveform, Random Vibration
- Probability Density
- Power Spectral Density (PSD)
- Shaker Power Spectral Density Response
- Equalization
- Calculating the RMS Acceleration from Spectral Plot
- Mechanical Shock
- Causes of Shock, Effects and Remedies of Shock
- Transient or Shock Tests
- Shock Pulse shapes, Shock Isolation Example
- Fatigue
- How Materials Behave: The S-N Curve
- Factors Influencing Fatigue Behavior
- Failure Models & Mechanisms
- Crack Growth
- Time-Dependent Failures, First Passage Model (Time to Failure)
- Goodman and Constant Life Diagrams
- Miner's Hypothesis
- Accelerated Testing
- Durability, Functional Tests
- Material Selection in Engineering Design
- Overall & Design-Limiting Material Properties
- Application-Specific Material Properties
- Example: Optimization of Shaker Table
- Chassis Analysis Example
- Chassis Dynamics, Section Properties
- Increasing Resonant Frequency, Torsion
- Rotational Inertia
- Design Suggestions
- Overcoming Problems
- Design Guidelines
- Structural rules of thumb
- Stresses in Printed Circuit Boards
- Appendix
- Understanding Decibels (dB) & Octaves
- Introduction to Shakers
- Fixture Design
- Types of Dynamic Testing
- Accelerated Testing
- Summary, Final Examination
- Award of Certificates for Successful Completion
For more info contact: http://www.ttiedu.com/ |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Powered by phpBB © 2001, 2005 phpBB Group
|
