|
Measurement Testing
A Resource Dedicated to Environmental Testing, EMC Testing, Vibration Testing and related areas
|
|
|
| Author |
Message |
Mjr
Site Admin
Joined: 13 Jul 2005
Posts: 294
|
 Posted: Fri Dec 02, 2005 4:51 am Post subject: Cable Coupling Clamp |
 |
|
York's Cable Coupling Clamp allows measurements to be made on a range of cable types, for the purpose of assessing their coupling and shielding effectiveness properties.
The Cable Coupling Clamp is comprises:
* launchers
* injection line
* injection line feeding cables
* ferrite rings
* plastic cable guides
* a base plate
The cable under test and parts associated with its construction are not supplied. A complete CCC01 assembly is shown to the right.
Plastic cable guides for the cable are supplied; these facilitate the mounting of the cable and positioning of the ferrite rings (not supplied).
The plastic plate is designed to allow cable length settings of 0.3m (EN 50289-1-6) and 0.5m (IEC 96-1).
The launchers are supplied with inserts to allow cable diameters of 2.5mm, 5mm, and 10mm. Corresponding clamps for the cable runs are also supplied.
Applications:
* measure transfer impedance and shielding effectiveness of cables according to EN50173-1
* measure capacitive coupling admittance
* measure the transfer impedance of connectors
For more info, contact:
http://www.yorkemc.co.uk/
Tel: +44 (0)1904 434440
Fax: +44(0)1904 434434
E-mail: enquiry@yorkemc.co.uk
York EMC Services Ltd
University of York
Heslington
York
YO10 5DD
United Kingdom |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Powered by phpBB © 2001, 2005 phpBB Group
|
