Measurement Testing
A Resource Dedicated to Environmental Testing, EMC Testing, Vibration Testing and related areas
 
Home • Forum • EMC/EMI • Vibration Testing/Analysis  • Environmental Testing • Books • Links • Glossary
 
DIY and save on EMI/EMC/RF solutions

 
Post new topic   Reply to topic    Measurement Testing Forum Index -> Shielding
Author Message
Mjr
Site Admin


Joined: 13 Jul 2005
Posts: 294
PostPosted: Sun Feb 17, 2008 1:09 pm    Post subject: DIY and save on EMI/EMC/RF solutions Reply with quote
Canned or out-sourced EMI/EMC/RF-control products/solutions can be very expensive. Why not DIY (do-it-yourself)?
A quick browse thru electronics parts-equipment catalogs -- e.g., Newark, digikey, Mouser, Farnell, etc. -- yield many solutions. Several of these can be easily implemented by even novices -- the parts come with manual and toll-free numbers to help you DIY every step of the way!

Examples of components you can install in-house (DIY!):


Shielding Gasket (shon above)

Specs:
Gasket Style:Rectangular
Gasket Material:Nickel plate over copper substrate
Length:0.138"
Thickness:0.06"
Surface Resistivity/Lin: 0.01ohm

Shielding Contacts
WITH VERY HIGH BOND PRESSURE SENSITIVE ADHESIVE
MOUNTING. Very low profile and low compression force(.060” 1,5mm
compresses to .015” 0,4mm) . Positioning at intervals provides electrical
contact between opposing metal surfaces. The Cu-Ni
metallized surface is compatible with most applications. Simple adhesive
mounting. Superb alternative to liquid dispensed “form-in-place”
gaskets due to small size.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Measurement Testing Forum Index -> Shielding All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group