Measurement Testing

Mjr · Site Admin Joined: 13 Jul 2005 Posts: 294

Models 5535 and 5545 Accelerometer Signal Conditioners from Metrix Instruments from accept signals from machine casing-mounted accelerometers and produce a 4-20 mA current source output proportional to the measured variable. The detection circuit is responsive to true RMS vibration but the output may be scaled either to peak or RMS units. A green LED indicates sensor and cable integrity. In the event of sensor failure, the LED extinguishes and the output current is driven below 3.6 mA, thereby signaling a malfunction. A BNC connector gives access to the buffered input signal for local analysis. Optional features for either model include filters and galvanic isolation between input, output and power supply.

Features:
Cost Effective Alternative to Rack Mount Monitors
Interface SV Series or a competitive velocity sensor to a PLC, DCS or other 4-20 mA input monitor
Provides 4-20 mA output proportinal to vibration level
Sensor/cable input “OK” light
BNC connector for FFT analyzers
Optional indicator, filter and/or galvanic isolation

Applications:
Gear mesh monitoring on gear boxes
Large Industrial Fans
Motors & Generators
Process Pumps
Centrifuges
Natural Gas/Diesel Engines
Gas Turbines

Contact:

Metrix Instrument Co. http://metrix1.com/
E-mail sales@metrix1.com